Treatment procedure for gear box, transfer case and axle reducing gear

Squeeze out the gel into the lubrication hole of the gear box, transfer case and axle reducing gear according to the following chart.

Revitalizing is considered to be complete after 50 operating hours or 930 miles (1500 km) run.

Lubrication system capacity qts.      Number of tubes      Treatment scheme

1 to 2                                                                        1                                 One-time

2 to 5                                                                        2                                 One-time

5 to 8                                                                        3                                 One-time

Note!

A characteristic indicator of the onset of revitalizing is mechanism noise reduction as early as the first few miles. If further noise reduction (improvement of mechanism running) stops at any time, this points to heavy wear of the mechanism, so it is necessary to double the recommended dose.

If after running for 60 to 120 miles (100-200 km) after XADO Gel-Revitalizant for gear boxes and reducers, the mechanism fails to improve its performance, the most probable cause of this is faulty diagnostics.

DO NOT use XADO Gel-Revitalizant for gear boxes and reducers for automatic gearboxes!